Jump to:
Wall Mounted Windvane 1250
Wall Mounted Windvane 2000
The Wall Mounted Windvane is an extension of the highly successful Rotating Windvane. This sign has all the benefits of the pavement spinning
sign - namely the greatly improved visibility as it rotates and displays the brand or message prominently. Available in three different sizes, this
product caters for shop fronts and buildings who wish to grab attention away from their competitors with unique and attractive spinning signs.

Why spinning signs are superior to other signs:

Improved visibility - spins in the wind
Good durability
Installed out of vandal reach
Increased sales
Strong branding
Cost effective exposure
The Windvane Design

Aerodynamically designed to rotate at exceptionally low wind speeds and maintain low revolutions at high wind speeds.
Manufactured to European quality standards.
All corners are radiused to provide an aesthetically pleasing product and to avoid injury or damage to property.
The rotating section is of composite construction with injection moulded ABS trim. This provides an exceptionally strong & light product, which
has an extended lifespan and is rust free. All brackets are manufactured from steel which is powder-coated for rust protection and protection
against harmful UV rays.
         Red                    Blue                    White         
Dimensions:
Overall size:
592mm(height) x 515mm(width)
Rotating Section:
500mm(height) x 515mm(width) x 80mm(depth)
Bracket:
415mm (length)
On volumes of 300 units and more, we are able to customise to
any Pantone colour.
Standard Colours:
Small, attractive and cost effective, this unit is easy to brand and install. Just apply vinyl to the ABS shell as per the vinyl application guide at
the end of this page and you're ready to install.
Wall Mounted WindVane 500
Wall Mounted WindVane 1250
This unit comprises of a one metre high rotating unit and a structurally secure bracket which
attaches to both the top and bottom of the rotating section. Multiple bearings and a
continuous central aluminium shaft are used for smooth operation and good longevity.
Graphics are printed or applied to ABS.
         Red                    Blue                    White         
Standard Colours:
On volumes of 300 units and more, we are able to customise to
any Pantone colour.
Dimensions:

     Overall size:

     1242mm(height) x 515mm(width)

     Rotating Section:

     1000mm(height) x 515mm(width) x 80mm(depth)

     Bracket:

     1242mm (length)
Bracket available in white only
 
Eye-catchingl, attractive and cost effective, this unit is easy to brand and install. Just apply vinyl to the ABS shell as per the vinyl application
guide at the end of this page and you're ready to install.
Wall Mounted WindVane 2000
This highly visible large format rotating sign comprises of a two metre rotating section mounted on a bracket
system made from structural steel. A central aluminium shaft, specially extruded aluminium side strips and an
aluminium outer shell makes for an extremely strong unit able to withstand most high wind conditions.
Six factory lubricated bearings are used to ensure smooth operation and an additional braking system can be
purchased to reduced the spinning speed or stop the unit during storms and gales.
Standard Colours:
Bracket available in white only

Trim available in:
         Red                    Blue                    White         
On volumes of 300 units and more, we are able to customise to
any Pantone colour.
Dimensions:

     Overall size:

     2218mm(height) x 515mm(width)

     Rotating Section:

     2000mm(height) x 515mm(width) x 80mm(depth)

     Bracket:

     2218mm (length)
 
 
The Warp Five

Wall Mounted Spinning Signs

Copyright © Sign Equipment Supply Limited 2019  Click here for our standard terms & conditions
Vinyl Application Guide:

Step 1
Blank Windvane's are supplied assembled with colour coded side strips and top and
bottom capping strips.

Start by disassembling the windvane by removing the 6 screws which hold the trim
in place







 
Step 2
Apply your vinyl to the blank windvane. It is a good idea to use a larger piece of
vinyl than the size of the windvane which will allow you to position the vinyl more
easily and then trim off the excess.








 
Step 3
Re-attach the side strips and capping strips by placing them back in place and
fixing with the screws provided.










 
Congratulations!
You have sucessfully applied artwork to your new Windvane!